Tag: 3D Printing
-
Affiliate disclosure: Anycubic provided the Photon P1 Max featured in this review for testing. This article contains affiliate links, which means I may earn a small commission if you purchase through them at no additional cost to you. Anycubic did not control my opinions. The good, the bad, and the resin-soaked observations are entirely my…
-
If you’ve spent any amount of time around the 3D printing community lately, you’ve probably seen the Anycubic Kobra 4 popping up everywhere. And if you’re anything like me, your first thought was probably: “Wait a minute… doesn’t that look a lot like the Kobra X?” After spending time testing the Kobra 4, running real…
-
If you’ve spent any amount of time around the 3D printing side of the internet, you already know one thing: People LOVE to argue about printers. Especially resin printers. Apparently every machine is either “the greatest thing ever made” or “literally unusable garbage” There is no middle ground. So after living with the Anycubic Photon…
-
If you’ve ever tried multicolor 3D printing… you already know the pain. You’re not printing your model.You’re printing a pile of wasted filament with a model hiding inside it. And honestly? That’s been one of the biggest reasons I don’t do more multicolor prints unless I absolutely NEED to. But the new Flashforge Creator 5…
-
I avoided resin 3D printing for years. The mess, the smell, the safety concerns it all seemed too intimidating. But the Anycubic Photon P1 completely changed my perspective on resin printing, and I’m here to tell you why this prosumer resin 3D printer might be the game-changer you’ve been waiting for. First Impressions: Unboxing and…
-
🎥 Watch the full interview here:👉 How To Sell 3D Prints Without Copyright / IP Infringement – Meet the Makers #5 With K3DC In this episode of Meet the Makers, I sat down with Kevin from K3DC, a 3D modeler, educator, and one of the most prominent voices online talking about copyright and intellectual property…
-
When you hear “Snapmaker,” you probably first think of 3D printing, but this powerhouse device goes way beyond that. My Snapmaker Artisan is a versatile 3-in-1 machine featuring a CNC module, a laser engraver, and a 3D printer, all of which can be swapped quickly thanks to its quick-change mechanism. Watch the video review here…
-
When it comes to desktop fabrication machines, few tools are as versatile as the Snapmaker Artisan laser engraver. This powerhouse combines a 3D printer, CNC machine, and laser engraver into one sleek, enclosed system. In today’s test, I’ll walk through my first experience with the Artisan’s 40W laser engraving module, including setup, calibration, material support,…
-
When it comes to cosplay props and 3D prints, one of the biggest challenges is hiding those pesky layer lines. For years, I’ve been on the Rustoleum filler primer train, but recently I decided to test something new: Seymour filler primer. In a battle royale of filler primer for 3D printing! Spoiler alert: one of…
-
I just wrapped up my second-ever 3D printed helmet project this time, an Iron Man helmet. My first was a Mandalorian helmet, which took me a year to finish (and nearly broke me). But this time, I was on a tight two-week deadline for my dad’s birthday, and I learned a ton along the way.…